A station center point punch

TR010201-marking stamping dies
 
CenterPoint Tool
 
1. Can process different plate thickness, the max thickness is 6.0mm.
2. Standard forming angle is 90°, for speical angle, please advise.
3. Please adjust the punch travel or mold height when process different plate thickness. Stamping without sheet is strictly preserved, otherwise will damage the tool.
 
Ground wire marking tool
 
1. Please provide detailed size and imprint angle.
2. Can process different plate thickness, need to adjust travel when process with different thick sheet.
4. Stamping without sheet is strictly preserved, otherwise will damage the tool.
 
 
Mark stamping tool
 
1. The reasonable height will make the forming shape real and clear, the standard height is 0.4-0.5mm.
2. Keep enough space between each stroke, so that to confirm full forming and tooling life.
3. Mold is correspondence with plate thickness, different plate thickness requires different mold.
 
Letter forming die
 
1. The reasonable height will make the forming shape real and clear, the standard height is 0.4-0.5mm.
4. Keep enough space between each stroke, so that to confirm full forming and tooling life.
 
Letter die
 
1. Stamping without sheet is strictly preserved, it’s applicable with all kinds of plate and thickness.
2. CNC punch press require special control program, when plate is moving to X axis or Y axis , the punch press must keep the punch head below.
3. Need to adjust spring when stamping letter on different plate thickness.
4. Form down.
 
Rotation character (combinedO die
 
Suitable for rotation station, can setting data between 0-9 freely, using for print digital indentification on products.